1911 PUNISHER Muzzle Brake and "Cobra " Grips COMBO COMPENSATOR +install

Description: +FREE Stainless Steel Spring Plug/ REMOVAL TOOLBEWARE of cheap Chinese knockoffs they may cause serious injury this is the original MADE IN USA+FREE Stainless Steel Recoil Spring Plug Included! Product Description: This combo package includes one 1911 compensator and one pair of 1911 grips. Compensator Details: Model: Punisher (straight ports) Finish: Lightly Polished Fits 5” Government length 1911 Autos with a barrel OD between .577"-581". The bushing ID. Is .583" +-.0005". Fits calibers up to and including .45 acp. Can fit .38 and 9mm Minor fitting may be required Not compatible with bull barrels. This compensator is not threaded. Suppresses recoil by venting gasses at muzzle and adding weight to the end of your barrel. Adds approx. 1” length to your barrel and weighs 2.35 oz. Some buyers may find that they need to modify the locking lug on the compensator because the fit is too tight. If you are comfortable making modifications yourself, you can usually do so with either a dremel or fine grit sandpaper. If not we recommend consulting a gunsmith. If your stock spring plug is longer than 1.2" you will most likely either have to shorten your spring plug or use a Commander spring plug instead. CNC Machined Billet Hardened, Aerospace grade stainless steel Grip Details: Style: Cobra FINISH: Brushed Surface/Satin Core MATERIAL: Aluminum FITS: Colt Government (5" barrel) and Commander (4.25" barrel) 1911 frames and all clones which follow the standard 1911 specs and use standard 1911 magazines (usually 7 or 8 rounds). Measurements: The distance between the screw holes, center-to-center is 78 mm or approximately 3 1/16 inches. AMBI Safety cut available by request If you need this cut we will add it for no additional cost. You can request the ambi cut in the “note to seller” section at checkout. The recessed ambi cut is a notch cut into the back side of the right grip panel. It leaves clearance for an ambi safety leg some 1911's have which sits under the grip. If you take off your stock grips and the back sides (that sit flush against the gun) are completely smooth then you do not need this cut. Compensator Installation Instructions and Use: Start with the guide rod installed in the slide. Insert spring, then insert spring cap. Depress the spring cap, insert comp. Twist to lock into place. DO NOT force the compensator onto you barrel. These may require some minor fitting depending on your barrel and slide combination, but should fit right onto a stock configured gun. We highly encourage you to contact us or visit a gunsmith if you have any issues regarding the fit of the compensator. Only use Standard Ammunition with these compensators. DO NOT use over pressure rounds ie P+ or P++ Return Policy All returns must be initiated through eBay to receive a full refund. You can find the return option next to this item in your eBay order history. Dealer Pricing is available! Seller's other than Valkyrie Dynamics attempting to sell copies of our designs can be held financially responsible for back damages, repayment of legal fees and profit loss. Satisfaction is guaranteed! If you don't like the item simply send it back and unmodified and I will refund you 100%! It is YOUR responsibility to be absolutely certain that all parts are installed and fitted correctly. Firearms are complicated mechanisms and improper installation and/or fitment can result in dangerous malfunctioning, damage to the firearm and serious injury to the shooter and other persons. The purchaser/installer of parts must accept full responsibility for the correct adjustments and functioning of the firearm after such installation. The purchaser takes full responsibility for any misuse, abuse, neglect, modification(s), improper installation, improper use, or improper handling.

Price: 64.99 USD

Location: Riverside, California

End Time: 2023-11-29T01:59:36.000Z

Shipping Cost: 0 USD