2020 Profile X-axis Belt Straighten Tensioner For Ender-3 Creality CR-10 CR-10S

Description: Description:Type: 2020 OR 2020 V-Slot Aluminum profile X-axis synchronous belt stretching TensionerMaterial: Aluminum alloyColor: Silver or BlackSurface treatment: anodizingApply to: 2020 OR 2020 V-slot aluminum profile Product Parameters:Please allow 0.1- 0.5mm error due to manual measurement. Please make sure you do not mind before you buy. Note: Please select the appropriate tensioner according to your machine structure.High quality aluminum alloy material, resistant to wear and deformation.For 2020 Aluminum profile printers, for Tevo Tarantula, for V-slot, for Tronxy X3, for Openbuilds.Surface anodizing treatment.The project type is a linear guide.Fine workmanship, wear-resistance and corrosion-resistance. How to adjust the tightness:Clockwise: Tighten the timing beltCounterclockwise: Relax the timing belt Notes：You can adjust the tightness of your X-axis belt at any time by turning the thumbscrew, but be careful not to adjust it too tightly, otherwise the printer may be misaligned.Before installing it, you must remove the original X-axis pulley holder, remove the T nut, and remove the belt from the pulley at the other end of the X-axis, which can leave more clearance for your installation. Then put the belt in our synchronous wheel, fix the synchronous wheel on the sliding chamber with screws, install the left and right fixing parts on the X-axis with the screws and T-nuts that we prepared for you, and Put the sliding compartment in, it is best to install the fixing plate and knurled thumbscrew. Product including:1 Set 2020 Aluminum Profile X-axis synchronous belt stretching Tensioner. Listing and template services provided by inkFrog

Price: 15.99 USD

Location: Shenzhen

End Time: 2024-09-05T11:00:30.000Z

Shipping Cost: 0 USD