Description: 2pcs Filament Connector, 3D Printer Filament Connector 1.75mm Filament Sensor for All Kind 1.75mm Filament DIY Multicolor Filament 3D Printer Red Product Details Brand: Coliao Material: Polyethylene Terephthalate Glycol, Polypropylene, Metal, Polyvinyl Butyral Color: Red Item Diameter: 1.75 Millimeters UPC UPC: 701715512870 Manufacturer: Coliao Brand Name: Coliao Color: Red Material Type: Polyethylene Terephthalate Glycol, Polypropylene, Metal, Polyvinyl Butyral Item Diameter: 1.75 Millimeters Wide ApplicationThe filament connector is suit for most kind of 1.75mm filament: PLA/ PETG/ PC/ PP/ PVB / HIPS, etc. Effectively Save Filament If the filament is disconnected during printing, or there is excess material after printing, which is not enough to print a model,it can be connected to continue printing. And multi-level models can be printed in different colors with the same filament attached. Filament Connector MaterialAll-metal 3d printer filament connector using all-metal materials, high quality and durable, innovative design, easy to use. Notes3d printer filament often lose water and become brittle when exposed to the air for a long time. To prevent the filament from becoming brittle, please keep it sealed. Service GuaranteeThank you very much for your choice and trust. If you have any questions about the product, you can contact us at any time. Specifications: Product Name: Filament Connector, 3D Printing Filament Fit for: 1.75mm Filament Suitable: PLA etc Filament Sensor Color: Red Material: Aluminum Package includes: 2 Filament Connector 2 Allen Key Instructions: 1.Trim the two filament heads that need to be connected. 2.One end pass- through from the direction of the big end of the filament connector to the tick mark. 3.The other end pass-through from the direction of the small head to the exposed 1-2mm. 4.Burn with fire for 5-7 seconds. (This time is mainly for ordinary PLA , other harder filament should be slightly longer). 5.Then quickly push the filament from the small end into the small hole at the big end, slowly (must not be fast). 6.Then slowly pull back when the joint is exposed, back and forth several times. 7.After the filament is completely cooled, the filament is completely pushed out from the small head end until it can be easily trimmed. If the filament is not smooth enough, you can trim it gently with a knife. Test the results after the repair is completed(carefully bend the joint - straighten - bend - straighten). 8.If you hear a crisp sound, we need to connect again. Unscrew the bolt at one end of the waist groove the connecting piece with, take out the filament, and assemble the filament connector for the next use. Note: The more the filament is used, the more severe the final bending is, and the strength of the rebound is relatively large.Therefore, it is stabilized with one finger before the fire, which can increase the success rate. The hardness of the filament of different materials is different. The harder the material is, the longer the burning time is. Do not wait until the end of the filament is very close to the extruder. When using, push from the small end to the big end.
Price: 32.47 USD
Location: US
End Time: 2024-12-01T02:31:03.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
EAN: 0701715512870
MPN: Coliao-Filament Welder Connector-Red
UPC: 701715512870
Brand: Coliao
Type: Does Not Apply
