AC Stage 3 Clutch Kit (1MS) For Nissan Pulsar NX 1987-90 1.6L SOHC (E16I, GA16I)

Description: Untitled Document Actual product may differ from photo* STAGE 3 (1MS)170% INCREASED HOLDING CAPACITY STREET/TRACK APPLICATIONS (HEAVY-DUTY STREET USE AND OCCASIONAL DRAG / ROAD / DRIFT RACING) The Action Clutch 1MS Stage 3 Kit uses their extremely durable, High Performance MIBA Sprung Ceramic Disc. This kit features a single diaphragm heavy-duty pressure plate with reinforced drive straps for increased durability. It is available in a 4 and 6 MIBA Ceramic puck configuration with the 4 puck being the more aggressive of the two. This MIBA Sprung Ceramic kit is engineered for low/mild horsepower vehicles. This Stage 3 MIBA Sprung Ceramic kit creates quick engagement as well as clutch chatter, which should be minimal once proper break-in is completed. Like all of their sprung kits, our Stage 3 kit features fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine as seen with competitors. After each kit is assembled, it goes through multiple quality checks before it is signed off by one of their lead engineers (50+ years combined experience). Break-in Requirements 500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable). Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity. *Increase in holding capacity is rated in Crank Torque, not Wheel Torque. Pressure Plate Features Ductile Iron Friction plate Single Diaphragm HD Pressure Plate Reinforced heavy duty drive straps 4 stage Heat treated diaphragm spring American grade rivets 100% dynamically spin balanced Clutch Disc Features MIBA Ceramic Sprung 6 Puck Clutch Disc Patented, Fully Enclosed, Spring Retainers Sprung Hub For Easy Engagement American Grade Rivets SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. ITEM DESCRIPTION ITEM DESCRIPTION Clutch Size: (7-1/2" x 13/16" x 18 spline) Torque Capacity: 247 lb-ft HP Rating: 264 HP What's included Single Diaphragm HD Pressure Plate MIBA Ceramic Sprung 6 Puck Clutch Disc Premium Throwout Bearing Premium Pilot Bearing Clutch Alignment Tool FITMENT FITMENT Fits 1995 - 1998 Nissan 200SX (1.6L DOHC 4cyl GA16DE; B14) Fits 1991 - 1993 Nissan NX1600 coupe (1.6L DOHC 4cyl GA16DE) Fits 1987 - 1990 Nissan Pulsar NX (1.6L SOHC 4cyl E16i, GA16i; N13) Fits 1/1986 - 1990 Nissan Sentra (1.6L SOHC 4cyl E16i, GA16i; B12; fits all model except 4WD) Fits 1991 - 1999 Nissan Sentra (1.6L DOHC 4cyl GA16DE; B13, B14) Fits 1995 - 2004 Nissan Tsubame (1.6L DOHC 4cyl GA16DE; sold in Mexico) Fits 1992 - 2006 Nissan Tsuru (1.6L DOHC 4cyl GA16DE; sold in Mexico) SHIPPING SHIPPING All packages are sent via USPS or UPS However, once the package gets picked up from our location, we have NO control over how long the carrier takes to deliver the item, at times the terminals can be congested and take up 1-2 day delays. INTERNATIONAL: All INTL packages are shipped using USPS, all import and duty fee's are buyers responsibility to pay. Express shipping is available upon request RETURNS RETURNS We offer a 30 Day Return Policy, Buyer pays for return shipping. WARRANTY WARRANTY Action Clutch warrants this product against defects in material or workmanship as follows: Action Clutch will replace at no charge for parts only that proves defective because of improper workmanship. If Action Clutch is unable to provide a replacement and repair is not practical or cannot be made in a timely fashion, Action Clutch may elect to refund the purchase price in exchange for the return of the product. Action Clutch offers a 90-day warranty from the original date of purchase. Action Clutch also offers a 30-day return policy with a 20% restocking fee. Action Clutches warranty does not cover any problem that is caused by: (1) Conditions, malfunctions or damage not resulting from defects in material or workmanship. (2) Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration. (3) Accessories, connected materials and products, or related products not manufactured by Action Clutch. (4) Damaged input Shaft causing HUB to strip (5) Failure to resurface the flywheel will invalidate Warranty.

Price: 379.96 USD

Location: Los Angeles, California

End Time: 2024-02-16T11:38:52.000Z

Shipping Cost: 0 USD