Brand New DC 4-Channel Wireless RF Remote Control Relay Switch With 2 Receiver

Description: Product Description Features:Long Range: Signal Can Pass Through Walls, Floors And Doors, Steadily Control Receiver From Any Place Within A Reliable Distance. Max Range Is Up To 98ft With No Obstacle.4ch For More Control: Adjustable Working Way, Control Equipment Turn/Reverse, On/Off. Switch Self-Lock, Jog, Inter-Lock.Security Control: Learning Code Has High-Level Security For Its Low Repetitive Rate And Re-Learn Mode, By Which It Can Delete The Old Code And Re-Learn A New Code When A Remote Control Get Lost, So You Are Always In Control Of It.Easy To Use: Extremely Easy To Setup, Learn, Relearn And Control. Stable And Reliable Performance, High Receive Sensitivity.Wide Application: Wide Range Of Applications From Simple Domestic Remote Control To Autonomous Control Such As, Window, Entrance, Garage Doors, Alarm System, Lifting Equipment And So On.Specifications:Receiver:Working Voltage: Dc 6-30vProduct Type: 4-Channel Remote Control SwitchRf Working Mode: Ask Superheterodyne Reception ModulationAsk Working Mode: Momentary/Toggle/LatchedMatching Mode: IntelligentLearning Code: QuiescentCurrent: 5maRf Frequency: 433mhzOutput Current: ≤10aReceiving Sensitivity: >104dbmTransmitter:Operating Rf Frequency: 433mhzCoded System: 1527 Learning CodeWorking Voltage: Dc 6vWorking Current: 15maModulation System: Ask Color: BlackRemote Control Battery: 2* Cr2032 Battery(battery included)Wiring Instructions:1. +: Connect To The Positive 12v Power Supply2. - : Connect To The Negative Electrode Of 12v Power Supply3. A: Output; Normally Open End Of The Relay4. B: Output; Relay Common;5. C: Output; Normally Closed RelayOperation Introduction:About Working Mode:1. Momentary/Joggle: Press And Hold->On; Release->Off Keep Pressing One Button, The Corresponding Channel Is Working /On; Release Your Finger Is Stop/Off. (4 Channel Switch(Receiver) Need 4 Button Remote Control (Transmitter )2. Toggle/Self-Lock: Press->On; Press Again->Off Press One Button For One Time, The Corresponding Channel Is Working/On; Press The Same Button Again To Stop/Off. (4 Channel Switch(Receiver) Need 4 Button Remote Control (Transmitter).3. Latched/Inter-Lock: Press->On; Press Other Button->Off Press One Button For One Time, The Corresponding Channel Is Working/On; Press Another Button Is Stop/Off(At The Same Time, Another Corresponding Channel Works). (4 Channel Switch( Receiver) Need 4 Buttons Remote Control (Transmitter).The Setting Of Working Mode:1.Momentary Mode: Pressing The Learning Key Button On The Receiver Board Once (Led Indicator On Receiver Board Will Signaling Simultaneously), Then Press Any Of The Remote Button, Signaling Three Times By RemoteS Led Indicator Means Setting Momentary Mode Successfully.2. Toggle Mode: Pressing Two Times The Learning Key Button On The Receiver Board Twice(Led Indicator On Receiver Board Will Signaling Simultaneously), Then Press Any Of The Remote Button, Signaling Three Times By Remote S Led Means Setting Toggle Mode Successfully.3.Latched Mode: Pressing The Learning Key Button On The Receiver Board Three Times (Led Indicator On Receiver Board Will Signaling Simultaneously), Then Press First Remote Button, Follow On Second Remote Button, Signaling Three Times By Remote S Led Indicator Means Setting Latching Mode Successfully (First Button Stands For On, Second Button Stands For Off ).4.2ch Momentary + 2ch Toggle: Pressing The Learning Key Button On The Receiver Board Four Times(Led Indicator On Receiver Board Will Signaling Simultaneously), Then Press Any Of The Remote Button, Signaling Three Times By Remote S Led Indicator Means Setting Successfully.5. 2ch Momentary + 2ch Latched: Pressing The Learning Key Button On The Receiver Board Five Times(Led Indicator On Receiver Board Will Signaling Simultaneously), Then Press Any Of The Remote Button, Signaling Three Times By Remote S Led Indicator Means Setting Successfully .6. 2ch Toggle + 2ch Latched: Pressing The Learning Key Button On The Receiver Board Six Times(Led Indicator On Receiver Board Will Signaling Simultaneously), Then Press Any Of The Remote Button, Signaling Three Times By Remote S Led Indicator Means Setting Successfully.7. 2ch Latching + 2ch Latched: Pressing The Learning Key Button On The Receiver Board Seven Times(Led Indicator On Receiver Board Will Signaling Simultaneously), Then Press Any Of The Remote Button, Signaling Three Times By Remote S Led Indicator Means Setting Successfully.8. Deleting Existing Remote Controls Data: Pressing The Learning Key Button On The Receiver Board Eight Times, The Led Indicator On Receiver Board Will Flash For Eight Times, It Means That The Existing Remote Controls Are Deleted Successfully.Package Includes:2 X Remote Controls1 X Relay Payment We accept all verified payment from eBay. Shipping 1. Items sent from US warehouse.2.Receiving time = Processing time + Shipping time3. Processing Time: Around 1-2 business Days4. Shipping Time: 3-5 business dayit may have a little delay during some holiday (such as Christmas),any problem ,please feel free to contact. Returns 1.30 days warranty from the purchased date. Please contact us via email before returning the defective item.2.Our warranty does not extended to any product that are physically damaged or that are not under normal operating conditions as result of misuse or improper installation on the buyer/users part.3.Return items should include the original packaging and all accessories. buyers MUST contact us for the returning address.4.In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item. Contact Us If you have any question, please e-mail us immediately, we will reply you as quickly as possible.We care about our valued customers, and will always try to help you. powered by

Price: 13.68 USD

Location: Kansas

End Time: 2024-09-07T01:57:24.000Z

Shipping Cost: 0 USD