Description: The MANLEY RCA phono jack is a unique designed part which has been in production for over 20 years. The machined brass barrel and precisely machined inner pin are gold plated for a long lasting, non-tarnishing, and attractive finish. The two-part dielectric is machined from Teflon®. The problem with lesser plastics or nylons in cheap RCA jacks is they melt when you solder to the jacks. Not ours! These jacks mount from the rear, from inside the chassis. Our MANLEY RCA jacks are easy to install either in a hard-wired or buss-wired style or mounted onto printed circuit boards. In fact, the rear part of the jack is a similar length, 0.400" as many common toggle and rotary switches allowing for mounting switches and these RCA jacks on the same PCB. This length can be increased by shimming back the jack with shoulder washers and/or internal toothed washers. Mounting the jacks to PCB boards assures anchoring of the hot and ground barrels so that the inner pin will never spin. The back barrel outside diameter is 0.570". The hot pin is 1/8" in diameter and protrudes 0.125" from the back barrel. It is scooped for easy wiring to the solder cup. Each MANLEY RCA jack set comes with a red shoulder washer and red flat washer OR a white shoulder washer and white flat washer. Please indicate in your buyer's note if you require white or red nylon washers, and how many sets of each if you need a custom number, so we can ship you what you need! The chassis hole should be 0.500" to use the insulators. One can also use a internal toothed washer to make a purposeful chassis ground connection. In that case, make the chassis hole 0.375, the diameter of the front of the RCA jack. An included 3/8 - 32 chrome-plated nut secures the MANLEY RCA jack to the chassis. There is 0.330" of thread available, plenty for a thick chassis. These are beautiful parts and they sound great. The sockets are both very practical and very strong. We don't think there is a better part on the planet, which is why we have used our MANLEY RCA jacks for over 20 years in our MANLEY vacuum tube high fidelity amplifiers and hifi preamplifiers. Please visit www.manley.com to learn more about our complete line of professional audio and hi fi products or to find a dealer near you. **SHIPPING - This item has been carefully packaged in a USPS Priority Mail medium size Flat-Rate Box. I research rates to find the least expensive and most efficient carrier for your item. Everything is shipped with insurance, to protect your purchase.** INTERNATIONAL CUSTOMERS - check your shipping cost for the size box listed above, by going to www.usps.com. I will not re-box and ship via any other method than what is listed in the original Ebay posting. I will not put a lower value than your winning bid on any customs forms to lower your import tax, nor will I mark your item as a gift. It is illegal so don't ask. RETURNS – Sorry, we do not accept returns on any item unless there is a description error. Please read the description carefully and look very carefully at the photos of your item before you purchase. If the item is damaged in shipping, contact us so we can assist you to file an insurance claim with the carrier.
Price: 500 USD
Location: Chino, California
End Time: 2024-09-07T20:36:07.000Z
Shipping Cost: 15.05 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Type: Jack
Brand: RCA
