Menzerna Heavy Cut Compound 400 Green Line

Description: Menzerna Heavy Cut Compound 400 (HCC 400) GREEN LINE is an innovative VOC-free cutting compound for automotive varnishes.HCC 400 GREEN LINE removes sanding marks and micro scratches in the shortest possible time without aggressive solvents.High performance finish without unpleasant solvent odors.By using a rotary or eccentric polishing machine with an abrasive polishing pad or a wool pad on velcro backing, HCC 400 will allow you to polish and polish any type of automotive varnish.A wool pad may be necessary on heavily scratched vehicles to get your job done faster. Beware of the sheepskin which in use with a rotary polishing machine may generate a lot of holograms.We prefer to work with an orbital polisher (double action) with a long stroke (15 or 21 mm) and a Heavy Cut pad. Cut / gloss: 8/8 Benefits :Extremely high abrasionExtremely fast removal of sanding marksHigh efficiencyGlossy finishNo dust formationVOC-free according to din EN ISO 11890-2Without unpleasant solventsEasy to handleSilicone free Recommended use1. Clean the surface thoroughly before polishing.2. Shake the bottle before use and apply a small amount of product to the polishing pad (a drop the size of a pea is sufficient for an area of approximately 40 x 40 cm).3. Use Menzerna Heavy Cut foam pad or Menzerna Lambs wool in case of serious defects. If using a new or dry pad, apply enough polish to prevent visible holograms forming.4. Use a rotary or orbital polisher and use the cross coating method.Apply light pressure at the start of the polishing process. Take the pressure off in the last cycles and increase the speed of the polisher by 10%.5. If you are working on very dry floors, spray a little water on the surface to prevent dust build-up.6. At first the polish will look a bit milky and should be worked until only a slightly transparent / oily film is visible.7. Once you are done polishing, remove any residue with a microfiber cloth, without applying any pressure.8. Whatever the surface requirements: use Menzerna HCC400 with Menzerna Soft Cut foam pad to achieve a glossy finish.By using a rotary or eccentric polishing machine with an abrasive polishing pad or a wool pad on velcro backing, HCC 400 will allow you to polish and polish any type of automotive varnish. A wool pad may be necessary on heavily scratched vehicles to get your job done faster. Beware of the sheepskin which in use with a rotary polishing machine may generate a lot of holograms. 2. Shake the bottle before use and apply a small amount of product to the polishing pad (a drop the size of a pea is sufficient for an area of approximately 40 x 40 cm). 3. Use Menzerna Heavy Cut foam pad or Menzerna Lambs wool in case of serious defects. If using a new or dry pad, apply enough polish to prevent visible holograms forming. Apply light pressure at the start of the polishing process. Take the pressure o

Price: 74.18 USD

Location: Afa

End Time: 2024-01-12T17:48:18.000Z

Shipping Cost: 39.4 USD