Description: This is a cutout template tool ONLY. Any grip or other accessory pictured is for demonstration purposes only and is NOT included. This part will allow you to notch your existing non-manual safety grip so that you can install a manual safety FCU into the grip. This will work on any P320 grip module including Compact, X-Compact, Carry, X-Carry, and Fullsize. This is particularly useful for specific grips that never had a factory manual safety option. To use:1. Lower the tool into the rear of the grip module at about a 20 degree angle and slide the guide into the recess of the grip that your FCU fits into. This keeps the tool from moving up or down.2. Gently push down on the forward part of the tool until the guide on the underside rests in the slide release channel. The tool should now be installed and free of movement. 3. Using a dremel or other cutting tool, carefully remove the material following the channel of the jig. The tool is plastic like the grip so work slowly so that you don't over-cut past the tool. This will not impact the functionality of the gun, but it may not look pretty if you cut too far.4. Use a small hand file to remove any burs or sharp edges for a nice clean look.5. Install your manual safety FCU into the grip module and check for functionality. Note: You will receive a random color which could be white, orange, red, or other. Exact color is not guaranteed.
Price: 12.49 USD
Location: Saint Charles, Missouri
End Time: 2024-02-13T06:59:23.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Dawtech3D
Number of Items in Set: 1
Type: Safety Cutout Template
Model: J320
Material: Plastic
MPN: J320
Country/Region of Manufacture: United States
Modified Item: No
Vintage: No
