SpeedyBee F405 Wing F405Wing APP 2-6S Flight Controller ELRS / CRSF Receiver VTX

Description: SpeedyBee F405 Wing F405Wing APP 2-6S FC Flight Controller ELRS/CRSF Receiver VTX/ Servo BEC WS2812 LED Product Name: SpeedyBee F405 WING FC board; -MCU: STM32F405,168MHz,1MB Flash; -IMU(Gyro&Accelerometer): ICM-42688-P; -Barometer: SPL006-001; -OSD Chip: AT7456E; -Blackbox: MicroSD Card Slot; -UART: 6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection)); -I2C: 1x Used for magnetometer, digital airspeed sensor; -ADC: 4x (VBAT, Current, RSSI, Analog AirSpeed); -PWM: 12x (11+1 "LED" pad); -ELRS/CRSF receiver: Supported,connected to UART1; -SBUS: Built in inverter for SBUS input (UART2-RX); -LED: 3xLEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1xRGB; -RSSI: Supported,Named as RS; Supported FC Firmware: INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING Product Name: SpeedyBee F405 WING PDB board; -Input voltage range: 7~36V (2~6S LiPo); -Battery Voltage Sensor: Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot); -Battery Current Sensor: 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot); -TVS Protective diode: Yes; -FC BEC output: Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS m module, Telemetry module, WS2812 LED_Strip; -VTX BEC output: Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V Designed for Analog Video Transmitter,Digital Video Transmitter, Camera. -Servo BEC output: Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, Designed for Servos. Product Name: SpeedyBee F405 WING Wireless board Wireless Configuration (long press BOOT button for 6 seconds to switch modes): -BLE mode, connect to Speedybee APP; -Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc. -Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes) -4x WS2812 LED strip connectors, adjustable colors and flashing modes -4x WS2812 LED strip connectors, adjustable colors and flashing modes On-board battery level indicator -4x RGB indicator LED for battery level display by number of lights SpeedyBee F405 WING F405Wing APP FC board ICM42688P Flight Controller for RC Fixed Wing Model Airplane Specifications Product Name SpeedyBee F405 WING FC board MCU STM32F405,168MHz,1MB Flash IMU(Gyro&Accelerometer) ICM-42688-P Barometer SPL006-001 OSD Chip AT7456E Blackbox MicroSD Card Slot UART 6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection)) I2C 1x Used for magnetometer, digital airspeed sensor ADC 4x (VBAT, Current, RSSI, Analog AirSpeed) PWM 12x (11+1“LED”pad) ELRS/CRSF receiver Supported,connected to UART1 SBUS Built in inverter for SBUS input (UART2-RX) LED 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB RSSI Supported,Named as RS . Supported FC Firmware INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING Weight 8.9g Product Name SpeedyBee F405 WING PDB board Input voltage range 7~36V (2~6S LiPo) Battery Voltage Sensor Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot) Battery Current Sensor 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot) TVS Protective diode Yes FC BEC output Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip VTX BEC output Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera. Servo BEC output Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos. Weight 11.4g Product Name SpeedyBee F405 WING Wireless board Wireless Configuration (long press BOOT button for 6 seconds to switch modes) BLE mode, connect to Speedybee APP Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc. Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes) 4x WS2812 LED strip connectors, adjustable colors and flashing modes Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads On-board battery level indicator 4x RGB indicator LED for battery level display by number of lights Weight 4.2g Thank you for you choose our product , we are trustworthy ,if you have any questions ,please message us freely , we would like to try our best to solve your issue .

Price: 55.69 USD

Location: 深圳

End Time: 2024-09-24T09:18:50.000Z

Shipping Cost: 0 USD