Vantech Black H1 Steel Universal Ladder Roof Van Rack (42") For Midsize Vehicle

Description: Vantech Black H1 Steel Universal Ladder Roof Van Rack (42") For Midsize Vehicle Description Specs Payment Shipping Returns Warranty Description The Vantech H1 steel system can hold up 600lb (evenly distributed). The Cross bars is 2" X 1" rectangular 14 gauge heavy duty. The Cross bar is protected by non-slip plastic bar guard on top. Mounting upright are 11 gauge at the base and are galvanized before powder coating. The Mounting uprights are 8" extra wide base at 10.5" total height. The Base is welded complete onto upright post for complete seal. There are 4X 3/4" eyehooks per mounting upright. Drilling is required to install system onto vehicle. Rubber cap on the upright post prevents wind noise and water leakage. The system Includes 5" ladder stopper to prevent ladder from sliding forward, Ladder stoppers are galvanized and rubber dipped. The system also includes 5.5" ladder guide for easy bungee and tie-down. Ladder guide are galvanized and rubber dipped. Easy turn knob allows quick adjustments and removal of ladder stopper and ladder guide. Hook & Loop Straps secure ladders within seconds up to 75 lbs. System powder coated for additional protection against rust. Specs MSRP : 279.00 Item Condition : New Color : Black Crossbar Color : Black Mounting Base Color : Black Material : Steel Surface Finish : Powder Coated Compatibility : Universal Fitment (Drilling Required) Wheelbase : n/a Warranty : 5 Years Bar Width : 42" Total Height : 12" Weight Capacity : 500 lbs. Mount Height : 10.5" Bar Type : A500 (W: 1" H : 2") 14 gauge steel rectangular cross bars 1 : 1" X 6" interior mounting plate 2 : All systems include bar guards to protect from premature wear and tear to the cross bars 3 : Includes 5" ladder stopper and 5.5" ladder guide 4 : Includes Hook & Loop Straps to secure ladder into place 5 : 4X eyehooks per mounting base for easy bungee or tie-down 6 : Polyfoam gasket included to prevent leaks 7 : 2" X 1" Reinforced extruded aluminum cross bars with structural support 8 : Super lightweight 12 lbs. (2 bar) 9 : All Stainless steel hardware 10 : 3mm thickness at base Payment We accept the following forms of payment. PayPal Mastercard Visa American Express Discover Sales Tax For shipments to New York addresses, we are required by State law to collect 8.875% Sales Tax. Shipping Packages will be shipped via UPS. Please allow 5-7 business days upon arrival to destination. Be aware that sometimes packages will not get to destination on time due to weather conditions or suburban locations. Please provide us with your telephone # in case there is a problem. We regret that this item can not be shipped to PO boxes. Item can be combined with other accessories, But not complete rack systems. Returns Unused merchandise may be returned freight pre-paid in the original shipping packaging with all labels, hardware, instructions. Used or installed items are not acceptable for return. All returns must be accompanied by a RGA # and a copy of the original receipt. The RGA # must be issued within 30 days from the date of delivery. Products with or without RGA # can not be returned after 30 days from date of delivery. To obtain a RGA # please call the number in the header and have your invoice number ready. Special order items cannot be returns. Any items sent freight collect will be refused and returned at shipper's expense. All returns are subjected to a 20% restocking/return fee. If item was shipped during promo "free shipping" customer will be subject to a 25% restocking/return fee. Customer pays all shipping and handling charge going to and from destination. Once the item has been examined and the reason of return is verified, you will be issued a refund. Refund will be issued by company check to the receiver (stated on invoice) and will take approximately 5-7 business days to process. Claims for Shipping Damages Product that are damaged during transport must be reported to the carrier within 24 hours after receiving delivery. Otherwise customer will be held liable for all damages acquired through shipping. Please inspect all packages thoroughly before signing acceptance of shipment. A written statement of product condition and picture must be submitted through eBay to start claim. Failure to do so will result in lose of time and claim. Warranty Warrantee 5 year Limited warranty will only apply to those who submit their warranty info through e-mail. When e-mailing warranty information please provide us with the invoice number, name, address and date of purchase. We will then e-mail you a form to fill out. Once the form is filled out please e-mail the form back. Non-registered warranty claims will not be accepted after 30 days of receiving item. Covered on the warranty are as follow: Mounting bases and drip rail clamps. Cross bars, nuts, bolts, washers, anchors, and gaskets are not included in the warranty. Warranty does not cover bent, warped or normal wear and tear of product. All electrical products are covered by a 1 years warranty unless item is stated otherwise. All mechanical products are covered by a 5 year warranty. All warranty items must be shipped to Vantech USA Incorporated 150 New Hwy Amityville NY 11701. Customers must cover all shipping fees to and from destination. To submit a warranty claim message us titled "warranty claim application". A claim form will be e-mailed to you within 24 - 48 hours. Fill out form and submit picture(s) as required. A warranty agent will contact you in 7-9 business days. Canceling an Order You may cancel an order at any time prior to processing at our center by calling the number in header. Unfortunately, we are not able to cancel orders once they have been shipped. Please refer to our Returns Policies for returns. Special order item(s) can not be cancelled once an order number has been given or e-mailed. About Us | Feedback | Sell Smarter with Kyozou.Inventory and Ecommerce Management

Price: 323.19 USD

Location: Amityville, New York

End Time: 2023-09-27T22:46:33.000Z

Shipping Cost: N/A USD