Wireless Rear View Reversing Backup Camera Night Vision Kit+ 4.3" Mirror Monitor

Description: Specification:Camera: * Image Device: 1/3 Inch Color CMOS OV7950 * Number of pixels: PAL: 628(H) x 582(V); NTSC: 510(H) x 492(V) * TV System: PAL/NTSC * Resolution: 420TV lines * Minimum Illumination: 0.2Lux/F1.8(0 LuX with LED) * Video Output: 1.0vp-p, 75Ohm * Gamma Consumption: 0.45 * White Balance: Auto * S/N Ratio: Better than 48dB * Electronic Shutter: 1/60-1/15,000 Seconds * Video Output: RCA Connector, 1.0Vp-p, 75ohm * View Angle: 120° * Size: 60.5(L)*27.5(W)*31.6(D)mm * Power Supply: DC 12V-24V * Operating Temperature: -40 to +80 RH95%Max * IP67-compliant Dustproof and Waterproof; * High Resolution Color CMOS(OV-7950) image sensor; * 7 IR LED'S night vision and excellent low lux performance; * The leds will turn on automatically in dark place. * Please take care of the sealing to prevent water leakage when installation. * Projecting distance scale lines onto the monitored image capable; * Mounts easily to existing license plate screws - no new mounting holes required; * Trapeziform sign direct parking * OmniPixel technology for low-light performance * The camera switch is controlled by the reverse gear shift. * You can install the camera on your license plate. During installation, please connect the power cable of the backup camera to the harness wires that connect to the backup light on the tail light assembly (Please note that the red wire end is positive, while the black one is negative). And connect the RCA output end to the car monitor.　　 Monitor: * Function: Mirror Monitor * Display Screen: TFT-LCD * Display size : 4.3Inch * Display Resolution: 800(H) x RGB x 480(V) * TV System: PAL/NTSC * Power: 2W * Power supply: DC 12V-24V * Video: 2-Channel video input * Environment Humidity: 10% ~ 90% * Operating temperature: -20 ~ 60 degree Celsius * Storage temperature: -40 ~ 85 degree Celsius * Installation: Install on the Dashboard, Easy for installation and uninstallation * Car Make: All Car * High Resolution, and excellent color effect; * Compatible with both PAL and NTSC system; * 2-Channel video input (V1 for DVD player/V2 for backup camera), automatically switch; * Fit all CCTV camera, car Reversing camera, car DVD player * 4.3Inch Car Rear View Monitor helps in preventing accidents while driving in reverse by avoiding children, traffic, pedestrians, toys and pets while backing out of the driveway or parking space * There are 2 RCA video inputs, one of which connects to VCD/DVD player called 'V1' and the other one connects to the backup camera called 'V2'. V1 will display first, but when you reverse your car, it will automatically switch into V2 and when you stop reversing, it will return to V1 again. 　 Package Contains: 1 x 4.3" TFT LCD Mirror Monitor 1 x Power Cable 1 x Manual 1 x Wireless Receiver(lit up red light) 1 x Wireless Transmitter (lit up blue light)1 x 7LEDs Waterproof Car Rear View camera Installation instructions: * The unit that is labeled "2.4 G wireless color video receivers" is the signal receiver. The other unit that is labeled "2.4 G wireless color video" is the signal transmitter. * Firstly, you should connect the camera with the transmitter. The yellow interface is for video and the red one is for power. Then connect the wire of the transmitter to the backup light of your vehicle. After theses, mount the camera on your vehicle with two screw s. There are two holes on the case of the camera. * Secondly, Connect the monitor with the receiver, The yellow interface is for video and the red one is for power,the wire of the receiver connects to the reverse circuit in the auto fuse box.

Price: 51.99 USD

Location: Hebron, Kentucky

End Time: 2023-12-14T15:25:02.000Z

Shipping Cost: 0 USD