Description: Created by Zarcade Limited, the Zega Mame Gear is a custom-made drop-in kit that fits perfectly into any Sega Game Gear shell without any modification and no soldering. It runs on a Raspberry Pi 3a+, Zero, Zero 2 and even a CM4 with the optional CM4 adapter, giving you access to thousands of retro games with Retropie. Pre-configured images are available to download so you can enjoy playing without the hassle of setting it up. Powered using one or two lithium batteries and re-charged via USB-C. FEATURES: 4 Front button support Plug and Play External access to USB and SD Card (Optional) Connect to a TV with HDMI out (Optional) Digital Audio Safe shutdown and power-off Battery Level Indicator USB-C Charging Pre-configured images Zega Mame Gear with 3.5" Composite LCD INCLUDED: 1x Mainboard 1x 3.2 inch Serial LCD 1x Digital Audio Board 1x USB-C Powerboard with battery charger, battery level and safe shutdown 1x Speaker 1x 4 wire Mainboard to Power board connector 1x 5 wire Mainboard to Audio board connector 1x Ribbon 1x 3D printed (Resin) Select button pre-soldered to Mainboard 1x HDMI Adapter for Raspberry Pi Zero or Zero 2 PAIRS WELL WITH: Zega Mame Gear Button Bracket Zega Mame Gear Battery Extension Cables 2000mAh Battery for Zega Mame Gear and Zega Mame Boy 40 Pin Male Header for the Raspberry Pi (2.54 Pitch) DOCUMENTATION: Mame Gear Pre-Install Checks Guide Zega Mame Gear Support Portal Downloads/STL Files/Images NOTES: Mame Gear requires a Raspberry Pi with a header. If you have a Pi with a pre-installed header, no soldering required. If not, you will be required to solder the header to the Pi. Although not required, adding the additional 2 front buttons will open up more games to play on the Zega Mame Gear. Some shell modification is required. You can also purchase a ready drilled shell from the Zega store. With the optional Zega Mame Gear expansion board, you can easily access the SD card and connect a USB device such as a Game Controller PCB color may vary. Raspberry Pi, shell, buttons, membranes, lens, battery not included. WARNINGS: Please ensure you are confident in your soldering ability to attempt this project. Under no circumstances will any refunds/replacements be made if soldering has been attempted.
Price: 109.99 USD
Location: Willow Grove, Pennsylvania
End Time: 2024-10-03T16:57:57.000Z
Shipping Cost: 4.5 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: Hand Held Legend
Type: USB-C Cable
Compatible Model: USB-C Cable
